No. 225057

Registered Gas Installer

Covering - Crewe  & Surrounding Areas

I use the tried and tested KAMCO power flushing equipment (shown here)

Power   Flushing

Any of these symptoms may indicate that your system has circulation and flow problems resulting from internal corrosion and the subsequent formation of rust, sludge and scale deposits...

A Power Flush can restore circulation and efficiency to the heating system by removing these undesirable products. Replacing the corrosive water with clean water which is chemically treated to prevent future problems.

'POWER FLUSHING', 'JET FLUSHING' & 'HARD FLUSHING'

Are all expressions used (in the heating trade ) to denote the process by which heating systems are forcibly cleansed using water at high velocity, but low pressure, so that no physical damage is caused to the system. The process can be made even more effective with the addition of powerful cleansing and mobilising agents.

The objective is to restore systems with circulation and boiler noise problems (caused by sludge and corrosion deposits) to optimum operation. Power flushing removes these deposits and the problems that they cause. Click the image (below ) to see a larger animated diagram of the symptoms which indicate that Power Flushing would be beneficial.

Power flushing, in conjunction with SYSTEM PRE-CLEAN, is also an excellent way to pre-commission clean new heating systems, to remove excess flux, swarf and other debris, and the grease and oil used to prevent rusting of components before use.

It is prudent to power flush a heating system immediately before fitting a new boiler to an existing system to prevent possible future problems. Many systems are found to contain corrosion and sludge, even if no flow problems have yet shown themselves.

Existing debris is often mobilised by alterations to the system/piping and the increased efficiency of the new boiler, and may then accumulate in the boiler heat exchanger, causing noisy operation, reduced efficiency and, in extreme circumstances, failure of the boiler. The high efficiency and compactness of modern boilers, developed to minimise fuel costs and pollution, means that they are more susceptible to problems caused by debris in the system water.

Using my KAMCO  clear-flow system,  enables me to complete the entire system  from one point in your home, ensuring minimal disruption to you and your home. This service is also offered at a reduced cost during a replacement boiler installation.

Is your Central Heating System slow to warm up?

Are some Radiators completely or partially cold?

Do Radiators need frequent bleeding?

Is your Radiator water black  or  like sludge?

Are there kettling noises from your boiler?

Do you have repeated pump failures?

What is Power Flushing?

All central heating systems, whether using conventional or Combi boilers are susceptible to sludge problems.

Edgley Pluumbing Services

Crewe Plumber (plumbing) & heating Engineer for all your plumbing needs in  Crewe, Nantwich, Middlewich, Sandbach, Holmes Chapel, Northwich, Congleton, Winsford, Chester.

01270 258158

Crewe,  Crewe Plumber, Crewe Plumbing, plumbing Crewe,  Plumber in Crewe, Plumbing in Crewe, Corgi  registered plumber, Gas installer, Crewe, Crewe, Crewe,